Docking System

Product Details:

In line with clients' diverse requirements, we are involved in providing an optimum quality range of Electro Hydraulic Dock Leveler With Telescopic Lip.

Description:
Electrohydraulic dock levelers with telescopic lip of DSI series are the most effective solution for accessing the load from the warehouse to the truck during loading and unloading operations. These levelers are used when a precise lip positioning is needed to the vehicle body, such as the lateral load, as well as the minimum distance between the edge of the vehicle body and the load located inside it. The segments of the lip, allow operation with vehicles whose width is narrower than the width of the leveler. Operation principle is that when activated, the leveler is lifted and the lip is pushed, then the platform is lowered until the lip reaches the floor of the vehicle. After the completion of loading and unloading the leveler is raised again, the lip retracts, the platform returns to its original position. Adjustment is performed by suspended or embedded installation type.

Main advantages:

The length of the lip is 500/1000 mm;

when working with truck that has a skew, the side tilt is possibile to 100 mm;

due to yellow-black signal strip, one can see that the platform is above the level of the ramp;

the surface of the platform is made of lentil sheet to provide a better adhesion of the forklift wheel;

provides safe transverse movement on the leveler;

safety system instantly stops the hydraulic leveler in the case of hose breakage or unauthorized departure of the vehicle during operations;

locking mechanism ensures a safe leveler maintenance and repair.

Product Details:

We are ranked amongst the most trusted firms deeply engaged in offering a wide range of Mechanical Dock Leveler.

Description:
The mechanical dock leveler series MODL do not require power supply, it can be used in cases where there is no electricity and there is no possibility to install an electric leveler. The mechanical dock leveler is lifted manually by 2 persons, while the lip opens automatically. Then the leveler is lowered until it reaches the truck. After assembly, the lip is lowered, the leveler is lifted and returns to its original position. Istallation is performed using embedded or suspended methods of installation.

Main Advantages:

• availability of self-cleaning hinges between the leveler and lip;

• lip length is 400 mm;

• when working with truck that has a skew, the side tilt is possibile to 100 mm;

• due to yellow-black signal strip, one can see that the platform is above the level of the ramp;

• the surface of the platform is made of lentil sheet to provide a better adhesion of the forklift wheel;

• side airbags prevent the staff feet getting into the gap between the leveler and the pit during operation;

• locking mechanism (repair backup) provides a safe leveler maintenance and repair;

• lip support ensures a safe transverse movement on the leveler in closed position.

 

Product Details:

Description:
DoorHan mechanical folding tracks are intended for loading and unloading operations; are installed on open ramps, compensating the height difference between the truck and the dock of up to 360 mm. Designed to be used with vehicles having approximately the same height. During handling operations the track is lowered into the vehicle body using the side handle until the lip reaches the floor. After the work is completed the track is raised and returns to its original position. Mechanical folding tracks FT Series may have a fixed or sliding design. The track, which has a sliding design, allows to work alternately in several places on the ramp, due to its mobility along the guide rail from one point to another. The mechanical folding track is installed on a prepared ramp. DoorHan mechanical folding tracks meet the requirements of standards and guidelines DIN EN1398, are certified and have certificates of conformity.

Main Advantages:

• availability of lock, that locks the track in a vertical position;

• due to yellow-black signal strip, one can see that the platform is above the level of the ramp;

• the possibility to move the track (for mobile tracks

Product Details:

We are a unique entity in this industry, actively engaged in offering a premium quality array of Mechanical Mini Dock Leveler.

Description:
The mechanical dock leveler "Mini" series MDLM do not require power supply, it can be used in cases where there is no electricity and there is no possibility to install an electrohydraulic dock leveler. Compared with the other mechanical levelers it weighs significantly less (370 kg) and can withstand a dynamic load of 6,000 kg and static of 9000 kg. The mechanical dock leveler can be lifted manually by one person, while the lip opens automatically. Then the platform is lowered until it reaches the truck floor. After completion of works, the lip is lowered, the leveler is lifted and returns to its original position.

Main Advantages:

• reliable equipment at a low cost;

• the surface of the platform is made of lentil sheet to provide a better adhesion of the forklift wheel

• due to yellow-black signal strip, one can see that the platform is above the level of the ramp.

 

Product Details:

With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Dock Levelers.

Description:
DoorHan Dock House Levelers of FEH and FET series, are designed to be installed outdoors and are indispensable in cases where it is necessary to maximize the use of storage space. Dock House Levelers are intended to facilitate loading and unloading operations in areas where perpendicular parking of the trucks to the building is not provided. One of the main advantages is that these can be installed and upgraded without changing the design of the main building. Their design allows to use all types of dock levelers, with hinged or telescopic lips (not supplied and must be ordered separately). Dock house levelers are available in four types of adjunction angles — 90, 60, 45 and 30 °. Installation is performed using surface method of installation. The installation is made fast due to the pre-asambled componets.

Main Advantages:

• maximum use of warehouse space;

• the ability to upgrade without rebuilding the main building;

• quick installation.

Product Details:

Aimed at a prosperous growth in this domain, we are engaged in offering an excellent quality range of Retractable Dock Shelter.

Description:
Dock Shleters with non-collapsible structure of D.SH-RDseries, are designed for large cargo flow. The frame is made of sandwich panels wich are reinforced with aluminum profiles. The front clamping bar is made of powder-painted aluminum profiles. The front sheet material is sufficiently flexible and has a high wear and tear resistance. During the loading and unloading operations, the vehicle body partially enters into the dock shelter. The top and vertical side sheets wrap around the body, providing a seal between the vehicle and the warehouse. With this kind of dock shelters the installation of the guide wheel or metal bumpers is needed. Installation of dock shelter is made using the overhlaid method of installation.

Main Advantages:

• dock shelter topsheet can be either single or double — to provide a better contact with the vehicle body;

• white reflective stripes located in front of the vertical sheets, provide accurate vehicle parking;

• a durable and energy-efficient design.

Product Details:

With a firm commitment to quality, we are involved in offering a wide ambit of Inflatable Dock Shelter.

Description:
Inflatable dock shelters of DSHINF series, are installed in places where it is required a maximum effective sealing and thermal insulation of the premises (for example, at warehouses with controlled temperature). During loading and unloading operations the vehicle is not pressed against the dock, as other analogs. The inflatable cushion wrap the vehicle body from all sides and ensures a better sealing. The air bags are made of wear resistant material “Cordura” which is high tear resistant. During loading/unloading works the vehicle body partially enters into the dock shelter. The top and side airbags are inflated, providing high tightness between the vehicle body and the premises. Upon completion of works, the cushions deflate. Inflatable dock shelters can be operated from a control panel (by using a special control unit). When using this type of dock shelters, on the platform, in front of the dock must be installed wheels guide or metal bumpers. Installation is done using the overlaid method of installation.

Main Advantages:

• the airbags are produced from the wear-resistant material “Cordura”;

• elongated top cushion may be 1200 mm, destined to be used with different types of vehicles;

• inflatable dock shelters can be controlled using control panels.

Product Details:

We are among the reputed organizations, deeply engaged in offering an optimum quality range of Portable Dock House.

Description:

Dock Houses of light series DHOUSL (90/60/45/30), are lighter and have a technological design.

Additional elements (flashings) are included in the standard delivery and make the connection with the building maximally sealed. Installation is done using the overhlaid method of installation. The installation is made quick due to the pre-asambled componets.